skip to Main Content

STEP BY STEP ABSORBENT FOAM USE

Spill control absorbent for Hazmat response
Clean-up is Quick and Easy

step 1 How to use absorbent foam

Step 1

To contain and surround the spill, pour Smithers absorbent to form a dike to protect sewers, drains and other potential run-off areas.

step 2 How to use absorbent foam

Step 2

Clean up with broom and spark-resistant shovel dispose of material in accordance with current EPA, State and Local regulations.

step 3 How to use absorbent foam

Step 3

You´ll see its fast absorbent action as the foam granulates effectively contain the oncoming spill. Continue to add absorbent depending on the viscosity of the liquid.

step 4 How to use absorbent foam

Step 4

Thoroughly mix broom or squeegee to allow complete absorption of the spill. In most cases this can be accomplished in just a few minutes.

Contain and Clean-up pesticides and other hazardous chemical spills
Clean-up is Quick and Easy

step 5 How to use absorbent foam

Step 1

Scatter Smithers absorbent granules over the spill. Continue adding granules until the spill is completely contained.

step 6 How to use absorbent foam

Step 2

Thoroughly mix the absorbent with a broom, allowing the foam granules to completely absorb the spill material.

step 7 How to use absorbent foam

Step 3

Sweep the mixture into a shovel or dustpan for immediate disposal.

step 8 How to use absorbent foam

Step 4

Dispose of waste in accordance with current OSHA, EPA, state and local regulations.