STEP BY STEP ABSORBENT FOAM USE
Spill control absorbent for Hazmat response
Clean-up is Quick and Easy
Step 1
To contain and surround the spill, pour Smithers absorbent to form a dike to protect sewers, drains and other potential run-off areas.
Step 2
Clean up with broom and spark-resistant shovel dispose of material in accordance with current EPA, State and Local regulations.
Step 3
You´ll see its fast absorbent action as the foam granulates effectively contain the oncoming spill. Continue to add absorbent depending on the viscosity of the liquid.
Step 4
Thoroughly mix broom or squeegee to allow complete absorption of the spill. In most cases this can be accomplished in just a few minutes.
Contain and Clean-up pesticides and other hazardous chemical spills
Clean-up is Quick and Easy
Step 1
Scatter Smithers absorbent granules over the spill. Continue adding granules until the spill is completely contained.
Step 2
Thoroughly mix the absorbent with a broom, allowing the foam granules to completely absorb the spill material.
Step 3
Sweep the mixture into a shovel or dustpan for immediate disposal.
Step 4
Dispose of waste in accordance with current OSHA, EPA, state and local regulations.